Fire Cement KOS 1kg TUB | FLUE JOINING COMPOUND
FLUE JOINTING COMPOUND is a ready mixed paste/putty for sealing metal flue joints in domestic or industrial applications where the flue temperature does not exceed 2500C. FLUE JOINTING COMPOUND does not harden completely and remains flexible to accommodate movement.
Benefits
· Ready mixed formula.
· Temperature resistant up to 200oC.
· Internal or external use.
· Non flammable.
Areas For Use
· Jointing metal flues.
· As a general sealing compound.
· Low pressure air ducts.
· Chasing pipes through brickwork.
Limitations
· Do not use externally when rain is imminent or on damp surfaces.
· Do not alter consistency
· Do not use in excess of 200 degrees C.
Surface Preparation
For maximum adhesion ensure all surfaces are free from all loose dirt and contaminants i.e. rust, soot, dust etc.
Application
FLUE JOINTING COMPOUND should be used straight from the tub. Apply by hand or putty knife working well into the joint to completely fill it. When connecting flue pipes, wrap glass fibre rope around the spigot end before inserting to facilitate a tighter joint.
Specific Data
Appearance |
Thick paste |
SG @ 20°C |
1.8 gcm3 (approx) |
Application Temp |
5oC to 60oC |
Service Temp |
-10 to 200oC |
Coverage |
1kg will cover approx 3 linear metres of joint. |
Health & Safety
Consult MSDS for full list of hazards.
Storage
Store at moderate temperatures in original containers. Keep out of direct sunlight.
Shelf Life
Up to 12 months when stored according to manufacturers instructions.
Fireparts have recently reduced the postage to Scotland, we and our suppliers are subsidising this heavily from our own profits. We will have reduced courier costs since mid 2022 and will continue to do so for as long as possible.
Scottish Highlands - AB36-38, AB55-56, FK17-21, IV1-39, IV52-54, IV63, KW1-14, PA21-40, PH19-26, PH30-41, PH49-50
Scottish Islands - HS1-9, IV40-51, IV55-56, KA27-28, KW15-17, PA20, PA41-49, PA60-78, PH42-44, ZE1-3
CALL US! to place an order. We need to check the products you require are available for shipment to Ireland. We will send you an invoice with VAT deducted.
Don't worry if you order the incorrect part, notify us within 7 days and return within 14 days. If we have advised you that your part is a SPECIAL ORDER then there may be a restocking | handling fee. Click for information about HOW TO RETURN. DO NOT return any parts to our registered office address in COVENTRY, this is not our warehouse and deliveries will be rejected by the admin team.
To return an item complete the RETURN FORM. We will then advise you a return address for your item.