For Appliances with TWO Piece Grates and where the 'De-Ashing' is LOW Level and the 'Shaker Knob' is located at the Front of the Appliance. Note that the 99-MK2 Range has individual firebars (with the De-ashing Knob ALSO located at LOW Level) and as such this listed part will NOT fit the Parkray 99-MK2 range. There are TWO types of 'De-ashing' (High and Low Level). Low Level has a De-ashing Knob at the Bottom Front (Low Level) Right Hand Side, where as 'High Level' the knob is located on the right hand side (towards the TOP) at 'High Level'. This listing is for LOW appliances with LOW level knobs / Lever.
Input MIN Order Quantity to obtain web discount: 1 unit(s). Total quantity of units included in ABOVE displayed price: 1 unit(s).
88PD, 88PF, 88Q, 88QF, 88T-(MK1), 88TF-(MK1), 88GT-(MK1), 99G, 99GL, 99GF, 99T-(MK1), 99TF-(MK1), 99GT-(MK1)
The 'De-Ash Lever' is a component in the Fire which enables the grate to be riddled (shaken). The 'De-Ash Lever fits below the Grate (internally in the Fire) at the rear of the Parkray appliance. One end of the 'De-Ash Lever' attaches to the 'Grate' and the other end to the 'Shaker Rod'. There are two types of 'De-Ashing Assemblies' (Low & High Level)
The 'De-Ash Lever Arm' can also be called 'Riddling Lever', 'Riddling Arm', 'Bottom Grate Lever' or 'De-Ashing Assembly'
We also stock the 'Shaker Rod' which attaches to the 'De-Ash Lever'
Fireparts have recently reduced the postage to Scotland, we and our suppliers are subsidising this heavily from our own profits. We will have reduced courier costs since mid 2022 and will continue to do so for as long as possible.
Scottish Highlands - AB36-38, AB55-56, FK17-21, IV1-39, IV52-54, IV63, KW1-14, PA21-40, PH19-26, PH30-41, PH49-50
Scottish Islands - HS1-9, IV40-51, IV55-56, KA27-28, KW15-17, PA20, PA41-49, PA60-78, PH42-44, ZE1-3
CALL US! to place an order. We need to check the products you require are available for shipment to Ireland. We will send you an invoice with VAT deducted.
Don't worry if you order the incorrect part, notify us within 7 days and return within 14 days. If we have advised you that your part is a SPECIAL ORDER then there may be a restocking | handling fee. Click for information about HOW TO RETURN. DO NOT return any parts to our registered office address in COVENTRY, this is not our warehouse and deliveries will be rejected by the admin team.
To return an item complete the RETURN FORM. We will then advise you a return address for your item.