Fire Cement KOS 500 grams TUB | NATURAL FIRE CEMENT
KOS FIRE CEMENT is a ready mixed blend of thermo setting resins and inorganic fillers that cures when exposed to heat, resulting in a mortar which is resistant to temperatures up to 1250˚C. Can be used for domestic and commercial applications on fire bricks, fire grates, flue pipes, flue bricks, boilers and other applications subject to extreme heat. Offers excellent adhesion to fire bricks, blockwork, stone and clayware, asbestos free.
Benefits
· Easy to apply by trowel. Excellent adhesion to fire bricks, blockwork, stone and clayware.
· Temperature resistant up to 1250oC.
· Suitable for domestic and industrial use.
· Asbestos free.
Areas For Use
· Fire bricks, fire grates, flue pipes, flue bricks
· Boilers.
Limitations
· Not suitable as a gas sealant.
· Always moisten surfaces prior to applying.
· Always apply heat gradually.
Surface Preparation
All surfaces must be clean, free from dust, grease and other contamination. Wet all surfaces to give a good key.
Application
Use straight form tub. Soften with a small amount of water if required. Wet all surfaces to which cement is to be applied. Work well into the joints. After applying, gradually increase heat over a 4 hour period. Make good any cracks which may form with fresh cement to form a smoke tight seal. Clean tools in warm water and soap after use.
Health & Safety
Consult MSDS for full list of hazards.
Storage
Store at moderate temperatures in original containers. Keep out of direct sunlight.
Shelf Life
Up to 12 months when stored according to manufacturers instructions.
Fireparts have recently reduced the postage to Scotland, we and our suppliers are subsidising this heavily from our own profits. We will have reduced courier costs since mid 2022 and will continue to do so for as long as possible.
Scottish Highlands - AB36-38, AB55-56, FK17-21, IV1-39, IV52-54, IV63, KW1-14, PA21-40, PH19-26, PH30-41, PH49-50
Scottish Islands - HS1-9, IV40-51, IV55-56, KA27-28, KW15-17, PA20, PA41-49, PA60-78, PH42-44, ZE1-3
CALL US! to place an order. We need to check the products you require are available for shipment to Ireland. We will send you an invoice with VAT deducted.
Don't worry if you order the incorrect part, notify us within 7 days and return within 14 days. If we have advised you that your part is a SPECIAL ORDER then there may be a restocking | handling fee. Click for information about HOW TO RETURN. DO NOT return any parts to our registered office address in COVENTRY, this is not our warehouse and deliveries will be rejected by the admin team.
To return an item complete the RETURN FORM. We will then advise you a return address for your item.