Adhesive GLASS CHANNEL SEALING TAPE 17mm x 2mm (Price is Per Metre)
Heat Resistant FLAT GLASS CHANNEL SEAL is the most universal product for sealing the glass in the appliance door. It bends around the edge of the glass giving a seal on each side of the glass. It is SELF ADHESIVE so does NOT require GLUE. The size of the GLASS SEALING STRIP IS 17mm wide X 2mm. If you require a wider tape, we also sell a 22mm Thick Glass Tape. The quoted price and units are shown as ONE Metres lengths.
Glue is NOT required as the rope sits around the glass and is fastened in by the glass retaining strips.
It is important when buying Sealing Rope that you use the correct one according to the manufactures instructions; so please be sure to check. Poorly fitted rope can result in a poor air seal to your appliance which will make it burn quicker than it should and can also crack the glass. Other Rope you should take a look at is Standard Sealing Rope
TIP: The 'Tape Seal' should go around ALL edges of the Glass. To work out the total length of seal required, add all sizes of the glass together.. ie.. A Glass measuring 250mm x 300mm would be 250mm + 250mm + 300mm + 300mm = 1100 (1.1 Metres) so you would need to order 2 metres of 'Sealing Tape'
Help on Fitting can be seen in our 'Help on Installing New Stove Glasses'
Fireparts have recently reduced the postage to Scotland, we and our suppliers are subsidising this heavily from our own profits. We will have reduced courier costs since mid 2022 and will continue to do so for as long as possible.
Scottish Highlands - AB36-38, AB55-56, FK17-21, IV1-39, IV52-54, IV63, KW1-14, PA21-40, PH19-26, PH30-41, PH49-50
Scottish Islands - HS1-9, IV40-51, IV55-56, KA27-28, KW15-17, PA20, PA41-49, PA60-78, PH42-44, ZE1-3
CALL US! to place an order. We need to check the products you require are available for shipment to Ireland. We will send you an invoice with VAT deducted.
Don't worry if you order the incorrect part, notify us within 7 days and return within 14 days. If we have advised you that your part is a SPECIAL ORDER then there may be a restocking | handling fee. Click for information about HOW TO RETURN. DO NOT return any parts to our registered office address in COVENTRY, this is not our warehouse and deliveries will be rejected by the admin team.
To return an item complete the RETURN FORM. We will then advise you a return address for your item.